How to build a Raspberry Pi RADIUS strong two factors authentication server in some easy steps ?
================================================================================================
(c) 2010-2023 SysCo systemes de communication sa
https://www.multiotp.net/
Current build: 5.9.7.1 (2023-12-03)
Supported Raspberry Pi hardware: 1B/1B+/2B/3B/3B+/4B
0) If you want to download a multiOTP Raspberry Pi image ready to use, follow this URL:
https://download.multiotp.net/raspberry/
Nano-computer name: multiotp
IP address: 192.168.1.44 (netmask: 255.255.255.0, default gateway: 192.168.1.1)
Username: pi
Password: raspberry
You can now flash the SD Card (check point 3) and 4) if needed), put the SD Card
into the Raspberry Pi and boot it. You can go directly to point 15)
1) If you want to use a battery backed up Real Time Clock, install it now in your
Raspberry Pi, the drivers for these models are included in the package:
https://afterthoughtsoftware.com/products/rasclock
http://www.cjemicros.co.uk/micros/products/rpirtc.shtml
https://www.robotshop.com/ca/en/elecrow-ds3231-high-precision-rtc-clock-module-raspberry-pi-b.html
https://learningdevelopments.co.nz/products/rtc-clock-module-for-raspberry-pi
2) Download the last image of Raspbian Lite to be flashed
https://downloads.raspberrypi.org/raspios_lite_armhf_latest (currently 2021-03-04-raspios-buster-armhf-lite.zip)
3) Format your SD Card using the SD Card Association’s formatting tool
https://www.sdcard.org/downloads/formatter/
4) Flash the raw image using the universal Windows/macOS/Linux Etcher from Balena: https://www.balena.io/etcher/
or Win32DiskImager for Windows: https://sourceforge.net/projects/win32diskimager/files/latest/download
or the dd UNIX tool
This should take about 10 minutes.
5) Copy all files from multiotp/raspberry/boot-part to the root of the SD Card
(it could overwrite some files like config.txt, were we have already enabled the I2C)
6) When copy is done, eject the SD Card
7) Connect the Raspberry Pi to the local network
8) Put the SD card into the Raspberry Pi and boot it
9) Login directly on your Raspberry Pi, or using SSH, with the default username "pi" and the password "raspberry"
10) Launch the initial configuration by typing sudo raspi-config
11) Choose the following options
1) Change User Password
2) Network options
N1) N1 Hostname (change the hostname to your favorite name, for example "multiotp")
4) Localization Options (if needed)
7) Advanced Options
A1) Expand Filesystem
12) Select Finish and answer "<Yes>" to reboot, or type "sudo reboot"
13) Login again directly (after about 30 seconds) on your Raspberry Pi, or using SSH, with the default username "pi" and your new password
14) Type "sudo /boot/install.sh"
Everything is done automatically (it will take about 35 minutes) and the Raspberry Pi will reboot automatically at the end
15) The fixed IP address is set to 192.168.1.44, with a default gateway at 192.168.1.1
To adapt the network configuration, edit the file /etc/network/interfaces
16) Congratulations! You have now an open source and fully OATH compliant
strong two factors authentication server!
Surf on http(s)://192.168.1.44 to use the basic interface (admin / 1234)
17) The default radius secret is set to myfirstpass for the subnet 192.168.0.0/16.
To adapt the freeradius configuration, edit the file /etc/freeradius/clients.conf.
|
Download
